China
Showing all 18 results
- Water Jet Looms, Weaving
Brand New Shuttleless Water Jet Looms
Brand New Shuttleless Water Jet Looms
Model: JW823.
Available Reed Width: 150/170/190/210/230/260/280/320/340/360/420/450 cm
Sing/Double/Three & Four Nozzle available:
Shedding Motion: Plain/Cam/Dobby
Let-off: Mechanical/Electronic
Take-Up: Mechanical/Electronic
Installed Power: 1.5Kw to 4.5Kw. Speed: 600 to 1200 rpm (depends on fabric)
Weft Insertion Rate: 2280m/m
Weft Density: 5 to 80 picks/cm
Cutter: Mechanical. Leno Device: Planetary Gear Type
Accessories per Loom:
Reed. Weft Accumulators: Panel box with LCD Display. Heald Frames: 6 pcs (for plain). Beam & Cloth Roller: Heald WireSKU: SA271024WWX - Ring Spinning Parts, Spare Parts
Chinese Balloon Control Ring for different Ring Frames
Chinese Balloon Control Ring for different Ring Frames
Make: China, Condition: Brand New, Size: All sizes available, Material for Ring: High Hardness 304 Stainless Steel. Service life of around 3 years.
Available for Ring frames like: LAKSHMI, JINGWEI, TOYODA RX240, RX300, Rieter K44, K45, K46, Zinser, Marzoli, SuarerSKU: SA280524SRJ - Boilers, Misc Equipment
Chinese Jiangsu Steam Boiler
Chinese Jiangsu Steam Boiler
Brand: JiangSu JinDing Boiler. Capacity: 1o Tons/Hr. Rated Working Pressure: 1.6 MPa. Rated Steam Temp: 204 Degrees C. Year: 2017-11. with complete accessories. in excellent condition and readily available.
SKU: SA271024MBC - Open End, Waste Recyling
Chinese Jinan Xinjinlong Fabric Recycling Plant
Chinese Jinan Xinjinlong Fabric Recycling Plant
Brand: Jinan Xinjinlong. Model Year: 2022-4. Plant Running Load: 65 – 70 KWh.
Cutting Machine:
Designed Output: 500-1000 Kg/h. Installed Motor Power: 7.5 KWFabric Opener
Designed Output: 350-400 Kg/h. Installed Motor Power: 38.5 KW. Carding Roller Size: 600 x 1000 mm11 Roll Carding Machine
Designed Output: 200-300 Kg/h. Installed Motor Power per Roller: 5.5 KW.
Carding Roller Sizes:
Roller 1: 400 x 1000 mm
Roller 2 to 11: 250 x 1000 mmBale Press:
Pressure: 40KN. Installed Power: 11 KW. Bucket Size (L x W x H) : 950 x 530 x 1100SKU: SA060525OWC - Generators, Misc Equipment
Chinese Nanjing Captive Coal Fired Power Plant 6.8MW
Chinese Nanjing Captive Coal Fired Power Plant 6.8MW
Design BasisDesign, Engineering, Procurement, Supervision of Installation, and Commission by Nanjing Turbine Power Station Engineering Design Institute (NTCE) of Nanjing China.
1- Boiler system. 2- Steam Turbine system. 3- Generator system. 4- Fuel Conveying system. 5- Lime stone power injection system. 6- Ash & slag handling system. 7- Chemical water treatment system. 8- Water supply & drainage system of power plant. 9- Firefighting system of power plant. 10- Electrical system Control system Ventilation and air conditioning system.
https://youtube.com/shorts/mQQ5BHq6dwQ
Main Technical Index
Total occupied coverage 2.4hm2
Coverage area of each Kw 2m2 /kW
Building coefficient 21%
Site utilization coefficient 38.5 %
Gross Power Generation 6MW
Auxiliary load 0/78MW
Net Power supply 5.22 MW
Gross heat rate 3528.7kcal/kwh
Thermal efficiency for gross power gene 24.37%
Net heat Rate 4052.5kcal/kwh
Thermal efficiency for net power supply 21.22%
Auxiliary load ratio 13 %
Plant total thermal efficiency (NET) 21.2%Specification of main equipment
Boiler:
Qty 1 set
Model UG-35/3.82
Rated output 35t/h
Main steam temperature 450℃
Main steam pressure 3.82MPa
Feed water temperature 150℃
Flue gas exhaust temperature 145℃
Boiler blowdown rate 2%
Fuel Indonesian/South African imported
Design efficiency 89%Turbine
Qty 1 set
Model N6-3.43 M
Rated power 6 MW
Rated rotation speed 3000r/min
Rotation direction Clockwise direction (by viewing from turbine to generator)
Initial Steam inlet pressure 3.43MPa（a）
Initial Steam inlet temperature 435℃
Rated initial steam volume 29t/h
Rated steam rate 4.672kg/kWh
Rated heat rate 12406kJ/kWh
Heat recovery system 1 LP Heater +1 Deaerator + 1 HP Heater
Circulating cooling water inlet temperature 30℃
Rated steam exhaust pressure 0.0084 MPa (a）
Unit vibration value ＜ 0.03mm
Noise Level :＜ 85db(A)
Governing mode DEH (Digital- Electro–Hydraulic)Generator
Qtya 1 set
Model QFW-6.8-2
Rated power 6.8MW
Rated voltage 11kV
Rated frequency 50 HZ
Rated rotation speed 3000r/min
Rated current 446A
Power factor 0.8
Efficiency 97%
Cooling mode air-cooled
Rotation direction Clockwise direction by viewing from the turbine end
level (of stator or rotor) F level
Overload ability 10%
Excitation mode AC brush less excitationSKU: SA021223MGN - Ring Spinning Parts, Spare Parts
Chinese Steel Rings Super Polish & Titan Finish
Chinese Steel Rings Super Polish & Titan Finish
Origin: China. Brand: HZ Taitan.
Size: 35 x 54 x 3.2mm. H: 10mm (Titan Finish) Chromed. Qty: 15,000 pcs
Size: 42 x 54 x 3.2mm. H: 10mm (Super Polish) Chromed Qty: 1500 pcsSize: 38 x 54 x 3.2mm. H: 10mm (Super Polish) Non-Chromed: Qty: 6,000 pcs
SKU: SA100124PRC - Ring Spinning Parts, Spare Parts
Chinese TOCEN High-Speed Bare Blade Spindle Bolster
Chinese TOCEN High-Speed Bare Blade Spindle Bolster
Condition: Brand New, Type: Bare Blade, Model: TXD6103E-19, TOCEN Novel High-Speed Bare Blade type with long life. Lift: 7 inch. Wharve Dia: 19mm, Setting Dia: 24.80mm without spindle Brake
SKU: SA101223SRC - Support Machinery, Weaving
Electronic Jacquard GT568 High-Speed Machines (Brand New)
Electronic Jacquard GT568 High-Speed Machines (Brand New)
Application: suitable for air-jet, rapier, gripper shuttle-less loom, weaving all kinds of jacquard fabric.
Control: CF JC568 type independent control box
Housing: overhead type
Open style: double-lift and clear shed
Maximum circular weft count: 65535wefts （EP a single figure capacity）
Jacquard needle number: 1408、1536、2816、3072、3328、4096、5120、6144 needlesGT568 HIGH-SPEED ELECTRONIC JACQUARD MACHINE
The service life is 2 times compared to a year-on-year basis. Save electricity by 50% compared to
year-on-year basisSKU: n/a - Support Machinery, Weaving
Electronic Jacquard GT568T High-Speed Machines (Brand New)
Electronic Jacquard GT568T High-Speed Machines (Brand New)
Application: the main applicable to jet shuttle-less loom, rapier, and gripper ascended,
weaving all kinds of jacquard fabric.
Open forms: double lift and clear openings
Pattern control mode: electronic（CFJC600 control box, a single pattern maximum 30M)
Apply loom sley: 1900~4600mm
Longitudinal harness group number: 32
Jacquard needle number: 6144、8192、10240、12288、14336GT568T HIGH-SPEED ELECTRONIC JACQUARD MACHINE INNOVATION CAM STRUCTURE
The service life is more than 2 times compared to a year-on-year basis.
running speed can reach more than 600r/min (high quality and stable operation)
With a 90 ° open pause time, can prolong the service life of componentsSKU: SA020324WSC - Ring Frames, Ring Spinning
Shanghai Erfangji EJM168 Ring Spinning Machines
Shanghai Erfangji EJM168 Ring Spinning Machines
Make: Shanghai Erfangji. Model: EJM-168. Year: 2007. Spindle Gauge: 70mm. Compact: Suessen Elite compact Compact motor: 5.5 Kw. Compact Inverter: 7.5 Kw. Main Motor: 25 Kw. Machine Inverter: CUTES 2000/pro- 30KW. Spindles Type: Adopter. Spindles make/Model: Novibra, HPS68 [06 frames] + NASA-HPS68 [ 02 frames]. Spindles Warve dia: 19 mm. Spindles per frame: 516 spindles each. Lift: 6 inch. Ring Diameter: 38 mm/ 3.2mm. Drafting System: SKF PK-2025. Roller Diameter: 27 x 27 x 27. Hangers: KHK. O.H cleaner: luwa
SKU: SA140125RRC
